These are metal tools used mainly in leathercrafting and other craft projects.
The stainless steel tracing wheel is used to make perforations on the material, and to transfer markings from patterns on to the material.
The body is about 17.5 cm long, not including the wheel. The wheel is about 2 cm in diameter with 0.75 cm long spikes.
The heavy-duty stainless steel scissors is ideal for leather craft work.
Its overall length is 21 cm with one enlarged eye ring for a better grip. It is pointed with an 8-cm blade.
The premium leather punch is made from stainless steel and is perfect for making holes in leather hides. It has 5 different holes that can be selected by adjusting the selector, and a spring that opens the punch after each use.
The hole sizes are as follows: 0.85 mm, 1.00 mm, 1.25 mm, 1.95 mm, and 2.40 mm. Please note that these dimensions are for hard leather. For softer leather, expect a slightly larger hole. The skin will stretch as it is pulled into the hole prior to snipping.
We do not recommend the premium leather punch for punching new holes in belts as the holes are too small.
The craft leather punch with tube uses 4 interchangeable tubes to create holes in the material.
When closed, it measures 21 cm in length. The tubes are ~1.5 cm long each. The 3 mm diameter tube is attached as the starter, and the others measure 1 mm, 2 mm, and 4 mm.
The tubes are screwed in place. You will need pliers to remove the 3 tubes in reserve. They come attached to back of the handle.
PLEASE HANDLE WITH CARE.
||Stainless Steel Wheel Tracer
||Heavy Duty Leather Scissors
||Premium Leather Punch
||Leather Punch with Tubes
There are no export controls for this item.
Made in Pakistan